Four printable worksheets for the small-space decisions that most often go wrong: whether an organizer fits a closet, where to prep food in a tiny kitchen, where the bed should go and what really fits under it. Fill one in with a tape measure before you buy anything.
No sign-up needed. Use your browser’s Print option to get a paper copy (each worksheet prints on its own page), or copy the questions into a notebook. Each worksheet links to the full guide it comes from.
LITTLE ROOM LAB • Measure before buying
Will this organizer work in your reach-in closet?
An organizer can fit inside a closet and still be a pain to use. Check three things separately: does it fit, can you reach it past the doors, and can you get things in and out easily. Use your own clothes, and record every number in the same unit.
Name of room: ________________________________
Date and units used: ________________________________
1. Measure the real space
| Measurement or check | Your result |
|---|---|
| Interior width, depth and height | |
| Clear opening with the doors open the way you normally open them | |
| Space below the rod and below the top shelf | |
| Your longest coat or dress, on its hanger | |
| Your widest hanger and your largest pair of shoes | |
| Door tracks, baseboards and anything sticking into the closet | |
| The organizer’s full size, including handles and feet | |
| How far its drawers or bins pull out, plus where you stand to use them |
2. Check it before you buy
- ☐ Open the doors the way you normally do and note which part of the closet you can actually reach.
- ☐ Stand where you would stand to pull out a drawer or bin, and check it can come all the way out.
- ☐ Hang your longest piece and check it clears anything you plan to put on the floor below it.
- ☐ Count the clothes in the laundry basket too, so the plan still works when everything is clean.
- ☐ Read the organizer’s assembly and anchoring instructions, and check your lease before drilling.
3. Choose one next change
The task that is awkward today:
One change I can try with what I already own:
What I will check when clean laundry comes back:
Closets are not built to one standard, so trust your own measurements over any list of typical sizes. Tall freestanding units may need anchoring to the wall; follow the maker’s instructions.
Full guide: How to Lay Out a Small Reach-In Closet
LITTLE ROOM LAB • Measure before buying
Find usable prep space in a small kitchen
Pick one ordinary meal and use it as the test. Measure the surfaces you have, try the meal, and only then decide if you need to buy a board, a cart or a table.
Name of room: ________________________________
Date and units used: ________________________________
1. Measure the real space
| Measurement or check | Your result |
|---|---|
| Clear counter length and depth | |
| Cutting board size and where you stand to use it | |
| Sink opening, if a sink-top board is an option | |
| Cart or table size, including handles, and where it parks after the meal | |
| Cabinet doors, drawers and the oven door opened next to the prep spot | |
| Heat sources, vents and outlets near the prep spot | |
| Shelf depth and height for anything you plan to move off the counter | |
| Lease rules or installation steps for anything you plan to add |
2. Try the whole meal
- ☐ Clear one stretch of counter, aiming for about 24 inches of prep space.
- ☐ Give everything you moved a new home you can still reach.
- ☐ If you use a sink board or a cart, check it sits steady and does not block a drawer or the oven door.
- ☐ Cook the meal and note every moment you had nowhere to put something down.
- ☐ Put everything away afterward and write down the step that was still awkward.
3. Choose one next experiment
The step that slowed the meal down:
One change I can try with what I already own:
If I still need to buy something, the exact job it has to do:
Keep any improvised surface well away from burners and vents, and follow the instructions for every board, cart and appliance you use.
Full guide: What to Do When Your Kitchen Has No Counter Space
LITTLE ROOM LAB • Measure before buying
Where should the bed go?
In a small bedroom, the bed wall decides almost everything else. Sketch the room, mark the fixed things, then test each possible bed wall against the clearances below.
Name of room: ________________________________
Date and units used: ________________________________
1. Measure the real space
| Measurement or check | Your result |
|---|---|
| Room length and width | |
| Bedroom door: position, width and which way it swings | |
| Closet door: position and swing | |
| Windows you need to open, and their sill height | |
| Radiators, heaters and outlets on each wall | |
| Your bed, including frame and headboard | |
| Dresser width and depth | |
| Space left beside the bed and at its foot, for each wall you try |
Standard mattress sizes
| Mattress | Width by length |
|---|---|
| Twin | 38 by 75 in |
| Full | 54 by 75 in |
| Queen | 60 by 80 in |
| King | 76 by 80 in |
These are standard US mattress sizes. Frames and headboards add a few inches, so measure the bed you own.
2. Test each bed wall
- ☐ Start with the longest wall that has no door, closet door or window you need to open.
- ☐ Keep about 24 inches clear on every path you walk daily. 30 to 36 inches feels comfortable.
- ☐ Leave about 30 to 36 inches in front of the dresser so the drawers open fully and you can stand there.
- ☐ Check that every door, including the closet, still swings all the way open.
- ☐ Keep the window reachable and leave a gap between the bed and any heater.
3. Decide
The bed wall I chose and why:
Where the dresser goes:
What I will move or replace to keep the walkway clear:
These clearances are common rules of thumb, not building codes. If you share the bed, check that both people can get in and out without climbing over each other.
Full guide: Small Bedroom Layout Ideas That Leave Room to Walk
LITTLE ROOM LAB • Measure before buying
How many boxes really fit under your bed?
The space under a bed looks bigger than it is. Take these measurements on each side of the bed before you buy a single container, then plan for the side that is easiest to reach.
Name of room: ________________________________
Date and units used: ________________________________
1. Measure the real space
| Measurement or check | Your result |
|---|---|
| Height at the lowest point a box has to pass (side rail, slat or bracket), minus about half an inch | |
| Rug thickness, if boxes will slide over a rug | |
| Depth from each side to the first obstacle, such as a center rail or leg | |
| Clear length between the legs on each side | |
| Floor space beside the bed for pulling a box out and kneeling behind it | |
| Height, depth and length of the containers you are considering |
2. Check before you buy
- ☐ Measure at the side rail, not the middle of the bed, which is usually higher.
- ☐ Make sure there is floor beside the bed for the box plus room to kneel behind it.
- ☐ Work out how many containers fit before buying a matched set.
- ☐ Plan to store only things that are clean and fully dry, and nothing you need every day.
- ☐ Put the label on the short end that faces you.
3. Plan the space
What will go under the bed:
Number and size of containers that fit:
Which side I will pull them from:
If you are thinking about bed risers, check that they suit your bed’s legs and weight and that the bed cannot slide off them.
Full guide: How Much Storage Is Really Under Your Bed?